Sublimation paper printer seems wire drawing, blurring, and offset?

Sublimation paper printer seems wire drawing, blurring, and offset?

Blog Article

Why does the Sublimation paper printer show up wire drawing, blurring, and offset? How to resolve it? SUBLICOOL will exhibit you.
Fault phenomenon
The facet of the textual content or sample drags out “burrs”, the line is damaged or the colour is missing. And skinny and lengthy wire-like wire drawing seems at the junction of the shade blocks.

Possible reasons and solutions

Nozzle offset
Reason: The print nozzle is offset and the ink jet path is now not vertical.

Solution: Calibrate the nozzle function and verify that the nozzle is no longer tilted.

Unstable bad pressure
Reason: The ink furnish device leaks or the ink sac is aging.

Solution: Check whether or not the ink tube is leaking, change the getting old ink sac. Besides, modify the bad stress price to the manufacturer’s encouraged range.

Warping edge
Reason: The warmness switch sublimation paper is warped or no longer flat, ensuing in ink pulling.

Solution: Preheat the heating platform/flatten the paper with the suction platform.

Pattern blur/ghosting
Fault phenomenon
The strains are weak, the edges of the picture are no longer sharp, the hues are mixed, the mild and darkish tiers can't be pulled apart. Possible motives and solutions

Insufficient switch temperature or pressure
Reason: Short warm urgent time, inadequate temperature, and uneven pressure.

Solution: Adjust the parameters of the press (usually 190-220℃, 20-30 seconds).

Poor best of sublimation paper
Reason: Low-quality sublimation paper has inadequate launch fee and the ink do no longer totally transfer.

Solution: Replace with high-release sublimation paper. Besides, take a look at specific manufacturers and pick out switch media that suits the ink.